TLF9UA102W0R8 [TAIYO YUDEN]
Single Phase EMI Filter, 250V, 50HzHz, ROHS COMPLIANT PACKAGE-4;
| 型号： | TLF9UA102W0R8 |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | Single Phase EMI Filter, 250V, 50HzHz, ROHS COMPLIANT PACKAGE-4 LTE |
| 文件： | 总10页 (文件大小：505K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
1
REMINDERS
■Product information in this catalog is as of October 2008. All of the contents specified herein are
subject to change without notice due to technical improvements, etc. Therefore, please check for the
latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment
incorporating such products, which are caused under the conditions other than those specified in this
catalog or individual specification.
■Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual
specification is available.
■Please conduct validation and verification of products in actual condition of mounting and operating
environment before commercial shipment of the equipment.
■All electronic components or functional modules listed in this catalog are developed, designed and
intended for use in general electronics equipment.(for AV, office automation, household, office supply,
information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the
components or devices into any equipment in the field such as transportation,( automotive control, train
control, ship control), transportation signal, disaster prevention, medical, public information network
(telephone exchange, base station) etc. which may have direct influence to harm or injure a human
body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear
control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic
equipment, if the equipment or the electric circuit require high safety or reliability function or
performances, a sufficient reliability evaluation check for safety shall be performed before commercial
shipment and moreover, due consideration to install a protective circuit is strongly recommended at
customer's design stage.
■The contents of this catalog are applicable to the products which are purchased from our sales offices
or distributors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that
may occur in connection with a third party's intellectual property rights and other related rights arising
from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign
Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and
other applicable regulations. Should you have any question or inquiry on this matter, please contact our
sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
3
△
△
コモンモードチョークコイル
（ACライン用）ꢀリードタイプ
COMMON MODE CHOKE COILS
(FOR AC LINES) LEADED TYPE
ꢀ
TLF9UAタイプ：ー25～＋115℃
TLF14CBタイプ：ー20～＋105℃
TLF25RAタイプ：ー25～＋105℃
OPERATING
TEMP.
等価回路（Equivalent circuit）
（製品
自己発熱を含む）
（Including self-generated heat）
特長ꢀFEATURES
・TLF 9UA（H）タイプ …………………………………………………小型形状
・TLF 9UA（H）TYPE............................................Small-sized configuration
・TLF14CB（H）タイプ …………………………………………………普
通形状
・TLF14CB（H）TYPE................................................Ordinary configuration
・TLF25RA タイプ …………………………………………………大電流容量
・TLF25RA TYPE ............. Large current capacity for power supply line use
用途ꢀAPPLICATIONS
TV、VTR、SW電源
,NCマシン、コンピュータおよび周辺機器,各種計測器、 As a preventive measure against noise terminal voltage or power supply
各種制御装置などの雑音端子電圧、電源ラインノイズ対策 noise in TV or VTR units, SW power supplies, NC machines, computer
・TLF 9UA（H）TYPE …………………………………………小電力用の機器
・TLF14CB（H）TYPE …………………………… 入力電力数10W の機器
・TLF25RA TYPE ………………………………………………高電力用の機器
systems, peripheral units, measuring instruments, and controllers.
・TLF 9UA（H）Type ...............................................low-current applications
・TLF14CB（H）Types...........equipment with several tens of watts of input power
・TLF25RA Type ....................................................high-current applications
形名表記法ꢀORDERING CODE
1
3
4
5
6
形式
TLF
形状
RA△
UA△
UAH
定格電流（A）
公称インダクタンス（μH）
インダクタンス許容差（％）
ラインフィルタ
リングコア縦形
U字コア縦形
U字コア横形
例
△
公称値 以上
R54
0.54
0.8
100
102
1000
W
±
0R8
10
103
10000
△＝スペース
R＝小数点
CB△
ꢀCBH
□字コア分割巻縦型
□字コア分割巻横型
△＝スペース
2
8
7
コア寸法（mm）
△9
1 4
2 5
当社管理記号
製品
区分記号
9
14
25
△
標準品
△
一般
△＝スペース
△＝スペース
△＝スペース
○ ○
T L F △ 9 U A H 1 0 2 W 0 R 8
4
5
6
7
8
1
2
3
1
3
4
5
6
Typeꢀ
TLF
Shapeꢀ
Nominal Inductance（μH）
Inductance tolerance（％）
Rated current（A）
Line filter
RA
△
△
Ring core, vertical type
U core, vertical type
△
Nominal Values or higher
R54
0R8
0.54
0.8
example
100
UA
W
±
102
103
1000
10000
10
UAH U core, horizontal type
△＝Blank space
R=decimal point
CB
△
Square type core
vertically split wound
ꢀCBH Square type core
horizontally split wound
△＝Blank space
2
8
7
Internal code
Core dimensions（mm）
△9
1 4
2 5
Product classification code
△
Standard Product
9
14
25
△
Standard
△＝Blank space
△＝Blank space
△＝Blank space
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
386
△
△
外形寸法ꢀEXTERNAL DIMENSIONS
TLF14CB Type
TLF14CBH Type
TLF25RA Type
5
〔ꢀ〕参考値
〔ꢀ〕Reference Values
TLF9UA Type
TLF9UA H Type
unit：mm（inch）
セレクションガイド
アイテム一覧
特性図
梱包
信
頼性
使用上の注意
Selection Guide
Part Numbers
Electrical Characteristics
Packaging
Reliability Data
Precautions
P.14
P.388
P.389
P.389
P.400
P.408
etc
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
387
△
△
アイテム一覧ꢀPART NUMBERS
インダクタンス
許容差
耐電圧［V］ 適用周
波数［MHz］
EHS
直
流抵抗［Ω］ 定格電流［A］定格電圧［V］
形ꢀꢀ名
インダクタンス
［mH］
Inductance
Type
Withstanding
voltage
Applicable
frequency
（Environmental
Hazardous
DC resistance Rated current Rated voltage
Inductance
［1 minute］
（min）
参考値
Reference Value
（max）
（max）
（max）
Ordering code
Substances）
Tolerance
TLF 9UA 102W0R8
TLF 9UA 202WR54
TLF 9UA 302WR42
TLF 9UA 502WR32
TLF 9UA 802WR25
TLF 9UA 103WR23
TLF 9UAH 102W0R8
TLF 9UAH 202WR54
TLF 9UAH 302WR42
TLF 9UAH 502WR32
TLF 9UAH 802WR25
TLF 9UAH 103WR23
TLF14CB 102 1R5
TLF14CB 222 1R2
TLF14CB 332 1R0
TLF14CB 472 1R0
TLF14CB 562 0R8
TLF14CB 682 0R8
TLF14CB 103 0R7
TLF14CB 223 0R4
TLF14CB 333 0R3
TLF14CB 473 0R2
TLF14CB 563 0R2
TLF14CB 683 0R2
TLF14CBH 102 1R5
TLF14CBH 222 1R2
TLF14CBH 332 1R0
TLF14CBH 472 1R0
TLF14CBH 562 0R8
TLF14CBH 682 0R8
TLF14CBH 103 0R7
TLF14CBH 223 0R4
TLF14CBH 333 0R3
TLF14CBH 473 0R2
TLF14CBH 563 0R2
TLF14CBH 683 0R2
TLF25RA 102W9R0
TLF25RA 202W5R5
TLF25RA 302W5R0
TLF25RA 502W5R0
TLF25RA 802W3R5
TLF25RA 103W2R5
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1
2
3
5
8
10
1
2
3
5
＋100％/ー10％
0.5
1.0
1.5
2.5
4.0
4.5
0.5
1.0
1.5
2.5
4.0
4.5
0.1
0.80
0.54
0.42
0.32
0.25
0.23
0.80
0.54
0.42
0.32
0.25
0.23
1.5
＋100％/ー10％
＋100％/ー10％
TLF9UA
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
TLF9UAH
＋100％/ー10％
8
＋100％/ー10％
10
1.0
2.2
3.3
4.7
5.6
6.8
10
22
33
47
56
68
1.0
2.2
3.3
4.7
5.6
6.8
10
22
33
47
56
68
1
＋100％/ー10％
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
min
0.18
0.32
0.38
0.42
0.6
1.2
1.0
1.0
0.8
0.8
TLF14CB
0.85
1.7
0.7
0.4
0.1～10
2.7
3.6
0.3
0.2
AC250
AC2000
5
0.2
6.5
0.2
0.1
1.5
0.18
0.32
0.38
0.42
0.6
1.2
1.0
1.0
0.8
0.8
TLF14CBH
0.85
1.7
0.7
0.4
2.7
0.3
3.6
0.2
5
0.2
6.5
0.2
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
＋100％/ー10％
0.03
0.05
0.06
0.07
0.11
0.17
9.0
5.5
5.0
5.0
3.5
2.5
2
3
5
8
TLF25RA
0.1～20
10
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
388
△
△
インピーダンス― 波数特性ꢀIMPEDANCE-FREQUENCY CHARACTERISTIC
TLF14CB/TLF14CBH Type
TLF9UA/TLF9UAH Type
TLF25RA Type
5
梱包ꢀPACKAGING
最小受注単位数 Minimum Quantity
CM / BU Type
最小受注単位数（pcs.）
Minimum Quantity
Type
箱づめ
Box
̶
袋づめ
Bulk
500
̶
250
̶
CM05RA06
CM05RB□□
CM08RA□□
CM08RB□□
CM12RA02
1000
̶
500
̶
100
200
BU08RA□□
̶
TLF Type
最小受注単位数（pcs.）
Minimum Quantity
Type
箱づめ
Box
500
TLF9UA□
TLF9UB□
TLF14CB□
TLF25RA
500
500
200
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
389
△
△
RELIABILITY DATAꢀ
1/4
Specified Value
Item
Test method and remarks
CMーRA/
BUーRA Type
TLF9U
TLF14CB
TLF25RA
CMーRB Type
1.Operating Temperature
Range
TLF9U：ー25～＋115℃
TLF14CB：ー20～＋105℃
ー25～＋105℃
ー25～＋105℃
Including temperature rise due to selfーgenerated heat.
2.Storage temperature range
3.Rated current
ー40～＋85℃
Within the specifed range
CM：
The maximum DC value having temperature increase
within specified temperature, as detailed in individual
specification.
5
TLF9UA, 14CB, 25RA：
The maximum AC value having temperature increase
within 45℃ by the application of AC current.
TLF9UB：
The maximum DC value having temperature increase
within 45℃ by the application of DC current.
CM：
4.Inductance
Within the specifed tolerance
Measuring equipmet：4262A（HP）or its equivalent
Measuring frequency：1kHz
TLF9U, 25RA：
Measuring equipment：Impedance analyzer（HP4192A）
or its equivalent
Measuring frequency：1kHz
Measuring voltage：0.35Vosc
TLF14CB：
Measuring equipment：LCR meter 4284A or its equivalent
Measuring frequency：1kHz
Measuring voltage：1.0V
CM, TLF：
5.DC resistance
Within the specifed tolerance
No abnormality
Measuring equipment：DC ohmmeter
CM：
6.Terminal strength
Fix the component in the direction to draw terminal
and gradually apply tensile force as detailed in indiviual
specifications.
tensile force
TLF9U：
Apply the stated tensile force gradually in the direction
to draw terminal.
Nominal wire diameter tensile φd
force
〔N〕
5
duration
〔S〕
〔mm〕
φ0.6
30±5
TLF14CB：
Apply the stated tensile force gradually in the direction
to draw terminal.
Nominal wire diameter tensile φd
force
〔N〕
10
duration
〔S〕
〔mm〕
φ0.8
30±5
TLF25RA：
Apply the tensile force of 10N in the direction to draw
terminal for 5 seconds.
Refer to individual specification
45℃ max.
TLF：
7.Temperature rise
Resistance substitution method
Applied current：Rated current
Duration：1 hr
8.Insulation resistance
100MΩmin.
CM・TLF：
between wires
Applied voltage：Rated voltage（CMーRA/BUーRA、CMーRB）
：500VDC（TLF9UA、14CB、25RA）
：250VDC（TLF ９UB）
Duration：60sec.
9.Insulation resistance
100MΩmin.
TLF：
between wire and core
Applied voltage：500VDC（TLF9UA、14CB）
：250VDC（TLF ９UB）
Duration：60 sec.
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
401
△
△
RELIABILITY DATAꢀ
2/4
Specified Value
Item
Test method and remarks
TLF9U
TLF14CB
CMーRA/
BUーRA Type
TLF25RA
CMーRB Type
10.Withstanding：
No abnormality
CM・TLF：
between wires
Applied voltage：250VDC（CMーRA/BUーRA、CMーRB）
：2000VAC（TLF9UA、14CB、25RA）
：500VDC（TLF ９UB）
Duration：60sec.
11.Withstanding：
No abnormality
TLF：
5
between wires and core
Applied voltage：2000VAC（TLF9UA、14CB）
：500VDC（TLF9UB）
Duration：60sec.
Within the specified range
12.Rated voltage
TLF9UA, 14CB, 25RA：250VAC
TLF9UB：50VDC
Appearance：
TLF9U
13.Resistance to vibration
CM，TLF：
No abnormality
Inductance change：
Within±15％
Inductance change：
Within±5％
According to JIS C0040
Direction：2hrs each in X, Y and Z direction Total：6hrs
Frequency range：10 to 55 to 10Hz（1 min.）
Amplitude：1.5mm（shall not exceed acceleration 196m2/s）
Mounting method：soldering onto PC board
Recovery：2 to 24 hrs of recovery under the standard
condition after the test.（CMーRB）
： At least 1hr of recovery under the standard
condition after the removal from test cham-
ber, followed by the measurement within
TLF14CB
Within the specified
range
2hrs.（TLF9U、14CB
）
At least 75％ of terminal electrode is covered by Solder shall be uniformly adhered onto im-
14.Solderability
CM：
new solder.
mersed surfaces.
Solder temperature：235±5℃
Duration：2±0.5sec.
Immersion depth：According to detailed specification.
TLF：
Solder temperature：230±5℃
Duration：2±0.5sec.（9U、25RA
）
：3±0.5sec.（14CB）
Immersion depth：Up to 1.0 to 1.5mm from PBC mount-
ed level.
TLF9UA・TLF25RA：
Appearance：No abnormality
Impedance change ： Refer to individual specifi-
cation
CM：
15.Resistance to soldering
Inductance change：Within±5％
heat
Solder temperature：260±5℃
Duration：5±0.5sec.
TLF14CB
Immersion depth：Up to 2～2.5mm from terminal root.
Recovery：1 to 2 hrs of recovery under the standard
condition after the test.
Within the specified range
TLF：
Solder temperature：260±5℃
Duration：5±1sec.（25RA
）
：10±1sec.（9U、14CB）
Immersion depth：Up to 1.0 to 1.5mm from PBC mount-
ed level.
Recovery ： At least 1hr of recovery under the standard
condition after the removal from test chamber,
followed by the measurement within 2hrs.
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
403
△
△
RELIABILITY DATAꢀꢀ
3/4
Specified Value
Item
Test method and remarks
TLF9U
TLF14CB
CMーRA/
BUーRA Type
TLF25RA
CMーRB Type
16.Thermnal shock
Appearance：No abnormality
TLF9UA・TLF25RA：
CM, TLF：
Impedance change ： Refer to individual specifi- Inductance change：Within±15％
According to JIS C0025
Conditions for 1 cycle
cation
TLF14CB：
Step
Temperature〔℃〕
Duration〔min〕
30±3
・Withstanding voltage：No abnormality
・Insulation resistance：No abnormality
1
2
3
4
ー25±3
Room Temperature
＋85±2
Within 3
30±3
5
Room Temperature
Within 3
Number of cycles：10
Recovery ： At least 1hr of recovery under the standard
condition after the removal from test chamber,
followed by the measurement within 2 hrs.
17.Damp heat
TLF9UA・TLF25RA：
TLF：
Inductance change：Within±15％
Temperature：60±2℃
※TLF14CB Temperature：40±2℃
Humidity：90～95％RH
TLF14CB：
Withstanding voltage：No abnormality
Insulation resistance：No abnormality
Duration：500 hrs
Recovery ： At least 1hr of recovery under the standard
removal from test chamber followed by the
measurement within 2 hrs.
18. Loading under damp heat
Appearance：No abnormality
Withstanding voltage：No abnormality
CM：
Inductance change ： Refer to individual specifi- Insulation resistance：No abnormality
Temperature：40±2℃
cation
Humidity：90～95％RH
Duration：500（＋12, ー0）hrs
Applied current：Rated current
Recovery：1 to 2hrs of recovery under the standard con-
dition after the removal from test chamber.
TLF：
Temperature：60±2℃
※TLF14CB Temperature：40±2℃
Humidity：90～95％RH
Duration：100 hrs
Applied voltage ： Apply the following specified voltage
between windings.
TLF9UA、25RA
TLF9UB
250VAC
50VDC
※TLF14CB Duration ： 500 hrs Apply rated current
across windings
Recovery ： At least 1hr of recovery under the standard
removal from test chamber followed by the
measurement within 2 hrs.
19.Loading at high temperature
Withstanding voltage ： No abnormality Insula-
tion resistance：No abnormality
TLF：
Temperature：85±2℃
Duration：100 hrs
Applied voltage ： Apply the following specified voltage
between windings.
TLF9UA、25RA
TLF9UB
250VAC
50VDC
※TLF14CB Duration：500 hrs
Apply rated current across windings
Recovery ： At least 1hr of recovery under the standard
removal from test chamber followed by the
measurement within 2 hrs.
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
405
△
△
RELIABILITY DATA
4/4
Specified Value
Item
Test method and remarks
TLF9U
TLF14CB
CMーRA/
BUーRA Type
TLF25RA
CMーRB Type
Appearance：No abnormality
CM：
TLF9U・TLF25RA：
20.Low temperature life test
Inductance change ： Refer to individual specifi-
Temperature：ー40±3℃
Inductance change：Within±15％
cation
Duration：500（＋12, ー0）hrs
Recovery：1 to 2hrs of recovery under the standard con-
dition after the removal from test chamber.
（CMーRA）
TLF14CB：
・Withstanding voltage：No abnormality
・Insulation resistance：No abnormality
5
： 1 to 2hrs of recovery under the standard con-
dition after the removal from test chamber.
（CMーRB）
TLF：
Temperature：ー25±2℃
※TLF14CBꢀTemperature：ー40±2℃
Duration：500 hrs
Recovery ： At least 1hr of recovery under the standard
removal from test chamber followed by the
measurement within 2 hrs.
Appearance：No abnormality
Inductance change ： Refer to individual specifi-
cation
21.High Temperature life test
TLF9U・TLF25RA：
CM：
Inductance change：Within±15％
Temperature：85±2℃
Duration：500（＋12, ー0）hrs
Recovery：1 to 2hrs of recovery under the standard con-
dition after the removal from test chamber.
（CMーRA）
TLF14CB：
・Withstanding voltage：No abnormality
・Insulation resistance：No abnormality
：1 to 2hrs of recovery under the standard con-
dition after the removal from test chamber.
（CMーRB）
TLF：
Temperature：85±2℃
※TLF14CBꢀTemperature：105±3℃
Duration：500 hrs
Recovery ： At least 1hr of recovery under the standard
removal from test chamber followed by the
measurement within 2 hrs.
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
407
△
△
PRECAUTIONS
CM-RA Type，CM-RB Type，TLF Type
Stages
Precautions
Technical considerations
1.Circuit Design
Operating environment,
1.The products described in this specification are intended for
use in general electronic equipment（, office supply
equipment, telecommunications systems, measuring
equipment, and household equipment）. They are not
intended for use in mission-critical equipment or systems
requiring special quality and high reliability（traffic systems,
safety equipment, aerospace systems, nuclear control
systems and medical equipment including life-support
systems,）where product failure might result in loss of life,
injury or damage. For such uses, contact TAIYO YUDEN
Sales Department in advance.
5
2.PCB Design
3.Soldering
Design
1.When Inductors are mounted onto a PC board, hole dimensions on the board should
match the lead pitch of the component, if not, it will cause breakage of the terminals
or cracking of terminal roots covered with resin as excess stress travels through the
terminal legs.
1.Please design insertion pitches of a base in the pitches that
fitted a terminal interval.
Wave soldering
1.Please refer to the specifications in the catalog for a wave
soldering.
2.Do not immerse the entire Inductors in the flux during the
soldering operation.
Lead free soldering
1.When using products with lead free soldering, we request to
use them after confirming of adhesion, temperature of
resistance to soldering heat, etc. sufficiently.
Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350 ℃
Duration - 3 seconds or less
1.If products are used beyond the range of the recommended conditions, heat stresses
may deform the products, and consequently degrade the reliability of the products.
The soldering iron should not directly touch the product.
Cleaning conditions
4.Cleaning
5.Handling
1.TLF type
Please contact any of our offices for about a cleaning,
Handling
1.Keep the product away from all magnets and magnetic
objects.
1.There is a case that a characteristic varies with magnetic influence.
1.There is a case to be damaged by a mechanical shock.
Mechanical considerations
1.Please do not give the product any excessive mechanical
shocks.
2.TLF type
2.TLF type
Please do not add any shock or and power to a product in
transportation.
There is a case to be broken by a fall.
Packing
1.Please do not give the product any excessive mechanical
shocks.
1.There is a case that a lead route turns at by a fall or an excessive shock.
In loading, please pay attention to handling indication
mentioned in a packing box（a loading direction / number of
maximum loading / fragile item）.
6.Storage conditions
Storage
1.To maintain the solderability of terminal electrodes and to
keep the packing material in good condition, temperature
and humidity in the storage area should be controlled.
・Recommended conditions
1. Under a high temperature and humidity environment, problems such as reduced
solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
ꢀAmbient temperatureꢀꢀꢀꢀꢀ 0～40℃
ꢀHumidity
ꢀBelow 70% RH
The ambient temperature must be kept below 30℃. Even
under ideal storage conditions, solderability of products
electrodes may decrease as time passes. For this reason,
product should be used within one year from the time of
delivery.
In case of storage over
6 months, solderability shall be
checked before actual usage.
！
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
409
△
△
相关型号：
©2020 ICPDF网 联系我们和版权申明